AllParts - Maple Jazz Bass Neck
JMO
- 20 frets (.103" x .045" (2.6mm x 1.1mm)
- Solid 1-piece Maple bass neck with black inlay dots, sanded, unfinished and ready to spray
- 10” (254mm) radius
- Nut width 1-1/2" (38.1mm)
- Heel width 2-7/16” (62mm)
- Tuning peg hole diameter 11/16” (17.5mm)
- Truss Rod adjustment at heel
- Neck thickness .88“ (22.3mm) at first fret, 1.01“ (25.7mm) at twelfth fret
JMF
- 20 frets (.103" x .045" (2.6mm x 1.1mm))
- Solid 1-piece Maple bass neck with black inlay dots and vintage tinted finish
- 10” (254mm) radius
- Nut width 1-1/2” (38.1mm)
- Heel width 2-7/16” (62mm)
- Tuning peg hole diameter 11/16” (17.5mm)
- Truss Rod adjustment at heel
- Neck thickness .86“ (21.8mm) at first fret, 1.00“ (25.4mm) at twelfth fret
JMF-B
- 20 frets (.103" x .045" (2.6mm x 1.1mm))
- Solid Maple bass neck with white binding, white pearloid block inlays, and vintage tinted finish
- 10” (254mm) radius
- Nut width 1-1/2" (38.1mm)
- Heel width 2-7/16” (62mm)
- Tuning peg hole diameter 11/16” (17.5mm)
- Truss Rod adjustment at heel
- Neck thickness .87“ (22mm) at first fret, 1.00“ (25.4mm) at twelfth fret
JMF-BB
- 20 frets (.103" x .045" (2.6mmx1.1mm))
- Solid 1-piece Maple bass neck with black binding, black block inlays, and vintage tinted finish
- 10” (254mm) radius
- Nut width 1-1/2" (38.1mm)
- Heel width 2-7/16” (62mm)
- Tuning peg hole diameter 11/16” (17.5mm)
- Truss Rod adjustment at heel
- Neck thickness .89“ (22.6mm) at first fret, 1.00“ (25.4mm) at twelfth fret
All necks may require fret leveling and polish, and may need to be fine tune to fit your instrument. This is normal and not a defect. All necks should be carefully inspected prior to installation and/or modification. All wood is unique with individual growth patters. Allparts cannot warranty a neck that does not get a sealer/finish put on it, as humidity, sweat, and temperature can cause the neck to warp and twist.
Looking for a custom finish?
If you would like a nitrocellulose finish on your body of choice, please visit the Paint Shop and add your required colour to the cart before checkout.
Warranty
Unless otherwise noted, all necks are made of the highest quality wood in either the United States or Japan. No two necks are exactly the same and may differ slightly from what is pictured. All necks have a Limited Warranty against defects in materials and workmanship. Warranty does not cover normal fret wear or customer modifications. Unless otherwise noted, this neck is licensed to Allparts Music Corporation by Fender® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender® and no Fender® warranty applies.
License
This neck is licensed to Allparts Music Corporation by Fender® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender® and no Fender® warranty applies.
All Fender® licensed Allparts necks are marked as such on the heel.